Dispense water without monitoring your carboys with volumetric or timed dispensing. Choose from four application specific models-then customize your system with the best cartridge pack for your needs. NANOpure DIamond UF: When it is essential that your ultrapure water contain undetectable levels of pyrogens, the DIamond UF is the right choice. The ultrafilter incorporated within the system produces water with less than 0.005 Eu/ml and log reduction values (LRV) over 6. To prevent the build up of contaminants on the surface of the membrane, the DIamond will periodically automatically flush water to drain. The automatic sanitization cycle enables you to routinely sanitize the system quickly and effectively. The ideal system for any application requiring pyrogen free water including cell and tissue culture. The NANOpure DIamond UF uses a hollow fiber ultrafilter that ensures product water with less than 0.001 Eu/ml pyrogens (bacterial endotoxins). Provides low cost biologically pure water with less than 10 ppb TOC (total organic carbon) and up to 18.2 megohm-cm resistivity. An automatic or manual intermittent flush cleans the ultrafilter without wasting valuable high purity water. Ideal for critical application including cell and tissue culture and monoclonal antibody production. Water exiting the system has < 1 CFU/ml bacteria levels. NANOpure DIamond UF TOC: Same features as the NANOpure Diamond UF with the additional capability to monitor TOC and resistivity. NANOpure DIamond Life Science UV/UF: The most complete water system on the market today. Includes the latest advances in ion exchange and filtration technologies as well as a dual wavelength UV lamp and ultrafilter. This system has demonstrated the ability to remove nucleuses such as RNase and DNase as well as DNA from challenged feed water. The water exiting the system is ideal for your most demanding molecular biology applications including; PCR, electrophoresis, as well as cell and tissue culture. The system includes automatic sanitization as well as automatic and manual ultrafilter flushing. The system produces ultrapure water containing < 0.005 Eu/ml of pyrogens, TOC values < 3 ppb, resistivities up to 18.2 megohm-cm and no detectable RNase, DNase and DNA. Product water will not degrade RNA...ideal for DAN amplification (PCR) and electrophoresis. Produces low cost pyrogen-free (<0.001 Eu/ml) water for tissue and cell culture and monoclonal antibody production. Water exiting the system has <1 CFU/ml bacteria levels. NANOpure DIamond Life Science TOC: Same features as the NANOpure Diamond Life Science UV/UF with the additional capability to monitor TOC and resistivity. All models deliver up to 1.5 liters per minute of purified water. Multi-language display. Bring your water to your work-with the optional remote dispenser. Water can be dispensed up to 8 feet from your system. One model accounts for worldwide voltages and fluctuations. Universal design allows for wall or bench mounting. Feed water pressure fluctuations are no problem with the DIamond. Every system comes complete with a pressure-regulating valve. System Diagnostics allows you to evaluate important system functions and alerts you if a problem exists. The system can be programmed to alert you if the water quality drops below your desired set point. RS232 output enables you to print or save to a computer or an optional print. Purity up to 18.2 megohms-cm-exceeds ASTM, CAP and NCCLS Type I water requirements. Complies with USP XXIII guidelines with compensated and uncompensated resistivity measurements. Whisper quiet operation with the newest pump technologies. Automatic sanitization cycle helps keep your system clean. Maintain your water quality during periods of non-use with the standby mode of operation recirculating water for 10 minutes every hour. Maintain bacterial and particle free water with a 0.2-micron absolute final filter. Trust your purity reading with automatic calibration verification of the electronics and optional SIST traceable calibration module. All models come with a wall-mounting bracket. Note: NANOpure Diamond must be fed with pretreated water. Specifications: Dimensions (W x H x D): 13.4" x 19.5" x 16.9", Max Inlet Pressure: 100 psig, Inlet Connection: 3/8", Inlet Water Temp. (°F): 40° to 120°, Max Flow Rate: 1.5 LPM, Shipping Weight: 45 Lbs.