Dispense water without monitoring your carboys with volumetric or timed dispensing. Choose from four application specific models-then customize your system with the best cartridge pack for your needs. NANOpure DIamond Analytical: The perfect system for your most sensitive analytical procedures including; Atomic Absorption (AA), ICP and ICP/MS and Ion Chromatography (IC). Customize your DIamond with the DIamond cartridge pack that is designed specifically for your feed water and application. NANOpure DIamond Analytical TOC: Same features as the NANOpure DIamond Analytical with the added ability to monitor TOC and resistivity. Nanopure DIamond UV: The ideal system for your critical applications requiring 18.2-megohm water with less than 2 ppb Total Organic Carbon. The water produced is perfect for applications requiring low organics including; High Performance Liquid Chromatography (HPLC), Ion Chromatography (IC), Gas Chromatography/ Mass Spec. (GC/MS) and TOC Determinations. A dual wavelength UV lamp oxidizes organics down to virtually undetectable levels and also maintains minimal bacterial levels within the system. The system alerts you when it is time to change the UV Lamp. Provides 105 parts per billion (ppb) TOC (total organic carbon) and up to 18.2 megohm-cm resistivity water. Nanopure DIamond UV TOC: Same features as the Nanopure DIamond UV with the added ability to monitor TOC and resistivity. All models deliver up to 1.5 liters per minute of purified water. Multi-language display. Bring your water to your work-with the optional remote dispenser. Water can be dispensed up to 8 feet from your system. One model accounts for worldwide voltages and fluctuations. Universal design allows for wall or bench mounting. Feed water pressure fluctuations are no problem with the DIamond. Every system comes complete with a pressure-regulating valve. System Diagnostics allows you to evaluate important system functions and alerts you if a problem exists. The system can be programmed to alert you if the water quality drops below your desired set point. RS232 output enables you to print or save to a computer or an optional print. Purity up to 18.2 megohms-cm-exceeds ASTM, CAP and NCCLS Type I water requirements. Complies with USP XXIII guidelines with compensated and uncompensated resistivity measurements. Whisper quiet operation with the newest pump technologies. Automatic sanitization cycle helps keep your system clean. Maintain your water quality during periods of non-use with the standby mode of operation recirculating water for 10 minutes every hour. Maintain bacterial and particle free water with a 0.2-micron absolute final filter. Trust your purity reading with automatic calibration verification of the electronics and optional SIST traceable calibration module. All models ship with a wall mounting bracket. Note: NANOpure Diamond must be fed with pretreated water. Specifications: Dimensions (W x H x D): 13.4" x 19.5" x 16.9", Max Inlet Pressure: 100 psig, Inlet Connection: 3/8", Inlet Water Temp. (°F): 40° to 120°, Max Flow Rate: 1.5 LPM, Shipping Weight: 40 Lbs.